Re: Coaxial Wedge Collaboration
not pushy at all... in fact this is exactly what this forum is about -- exchange of ideas in an agreeable manner. At some point we may disagree (which is a good thing) but we can be civil and agreeable about it.
Is there documentation on the expansion rate/flare of the conical on the b&c ? (sorry, at work and haven't looked up the b&c specs)
also, what 1'' comp driver you have in mind that can cross at 1.2K ? most 2'' can, but most 1'' are 2k or higher.
we should also spend a few brain cycles on the target response, or at least the response compromises we are willing to accept. I personally don't have an issue with a monitor with a slight dip at 800hz, a ''slight'' rolloff from 100hz-down to 80hz, and also don't have an issue with a monitor with a slight rolloff starting at about 10k on up. It HAS to do 80hz though... anything less than that is a non starter in my world. (church's) No -- 80hz is not necessary in the 120db stage screamer volume world, but in the 85db stage world of church, if the monitor can't do 80hz, it's ''tinny''
