Reply to thread

Message

<blockquote data-quote="Evan Kirkendall" data-source="post: 4716" data-attributes="member: 5">Long story short, the deal fell through on the EV xi1183A&#039;s that I was considering But, I stumbled on a deal for 4x SLS960&#039;s and 2x SBS25&#039;s. It was too good to pass up, and now I&#039;m the proud owner of that system. They were from a church install, which is great, but poses 2 issues:1- They&#039;re white. 2- They don&#039;t have handles. #1 is easy to solve- gut the boxes, sand down them down and paint them black. #2 is a bit more challenging. Community doesn&#039;t list handle dimensions or placement. If someone could tell me where they are located on the boxes(depth from front and top) and what size handles they use, I&#039;d be greatly happy. Also, since I&#039;ve got a pretty blank slate, I&#039;m considering putting 2 handles on each side of the SLS960&#039;s for easier lifting. I know the RS660 had them, but is there room on the 960 for side by side handles? Or does the horn flare interfere? Option 2 is placing 2 handles one above the other, but I don&#039;t know if there is any cabinet bracing in the way. Comments? Thoughts? Thanks!Evan</blockquote>

[QUOTE="Evan Kirkendall, post: 4716, member: 5"] Long story short, the deal fell through on the EV xi1183A's that I was considering But, I stumbled on a deal for 4x SLS960's and 2x SBS25's. It was too good to pass up, and now I'm the proud owner of that system. They were from a church install, which is great, but poses 2 issues: 1- They're white. 2- They don't have handles. #1 is easy to solve- gut the boxes, sand down them down and paint them black. #2 is a bit more challenging. Community doesn't list handle dimensions or placement. If someone could tell me where they are located on the boxes(depth from front and top) and what size handles they use, I'd be greatly happy. Also, since I've got a pretty blank slate, I'm considering putting 2 handles on each side of the SLS960's for easier lifting. I know the RS660 had them, but is there room on the 960 for side by side handles? Or does the horn flare interfere? Option 2 is placing 2 handles one above the other, but I don't know if there is any cabinet bracing in the way. Comments? Thoughts? Thanks! Evan [/QUOTE]

Verification