Normal
Re: Determining Load Ratings When Not Specified (16 ohm)The maximum output voltage should be the same if the load is 8 or 16 ohms, so I'd expect the power at 16 ohms to be exactly half of the 8 ohm spec.If you want a formula: P=V^2/R but you probably know that one already.
Re: Determining Load Ratings When Not Specified (16 ohm)
The maximum output voltage should be the same if the load is 8 or 16 ohms, so I'd expect the power at 16 ohms to be exactly half of the 8 ohm spec.
If you want a formula: P=V^2/R but you probably know that one already.
