Normal
The stock passive x-over has a x-over frequency at 6.5kHz. There is no need to cutback the sensitivity of the VHF wrt HF: they match already very good regarding sensitivity and the response is already quite flat. Note that the passive x-over has no outputs for the low-mids: it only provides outputs for the BMS driver.Verzonden vanaf mijn iPhone met Tapatalk
The stock passive x-over has a x-over frequency at 6.5kHz. There is no need to cutback the sensitivity of the VHF wrt HF: they match already very good regarding sensitivity and the response is already quite flat. Note that the passive x-over has no outputs for the low-mids: it only provides outputs for the BMS driver.
Verzonden vanaf mijn iPhone met Tapatalk
