Reply to thread

Message: <blockquote data-quote="Tim Weaver" data-source="post: 42344" data-attributes="member: 317">Re: Dual 18" Separate Chambers ??If that is the case, then no the tuning would not change. If, for example, You had a box that was ported on each end and tuned to say, 35 hz, then when you cut it in half each port is still tuned to 35 hz but is still dealing with same amount of "work" as it did in the full size box. Where before it was doing half the work being driven by 2 drivers, now it is doing all the work but only driven by one driver. This only works in the case you are describing though.</blockquote>

Top Bottom