Reply to thread

Message: <blockquote data-quote="Shane Presley" data-source="post: 83271" data-attributes="member: 110">Re: EAW forums - suggestion / help pleaseI'm running on the fact (and please correct me if I'm wrong), that the processor will "scale itself" and limit based on the setting you have entered. In other words... if you have a 4 ohm setting at 2100 watts for instance, that if you've dropped the load to 2 ohms, that it's going to limit based on the 4 ohm rating regardless. It's just going to "do the math" and properly limit based on the capablities of the amp, not so much on the load presented - but again please correct me if I'm wrong I'm in the same boat...lol</blockquote>

Top Bottom