Re: EAW forums - suggestion / help please
Yes that is correct Shane in that it will adjust based on the amplifier capabilities.
It seems that there are a lot of people looking for the instructions on how to update their processor...
Honestly it is really not that difficult nor majorly time consuming.
Set up your PC's IP address to talk to the UX8800
Launch EAWManager only
Go to TOOLS > COMMUNICATIONS
enter in the IP address of the UX (found in the UTIL menu via front panel controls)
Hit OK
Then click "CONNECT"
it should find the UX in the grey window.
Once it finds the UX, directly below that grey window select your "PRODUCT" as UX8800
Check to make sure you have the latest version of firmware where the last three digits in the firmware file are .122
Click "Update Firmware"
Once it is finished you are done 
