Re: EAW KF760 Line Array (with KF730 under hang)
My bad, Joe! What I really meant was between the first two KF730s there was a splay of 12 degrees, I was also referring to the 730 being a 12° vertical box and the 760 being a 3° vertical box. The adapter bar angle is, I believe, fixed at 4.5°. Neither Resolution nor KF760 wizard will let me use it any other way, and in practice the bar can only be pinned in one way... in any case I've never wanted less than 4.5 degrees, although I have wanted more! What was really happening was going from 3° vertical boxes set with 3° angle between them, to a 12° vertical box with 4.5°, and then increasing that angle in the next box to 12°, and then reducing it again to 9°.
I will certainly mess around with that more next time I have this product out since that was the only thing I didn't like. Probably user error for believing the array designer algorithm anyway, but I was much more focused on the long throw (which came out beautifully) as the near throw could have been covered by the end of the main array coverage anyway.
