Reply to thread

Message

<blockquote data-quote="Alan Sledzieski" data-source="post: 49498" data-attributes="member: 1022">Re: Eaw la 325 help needed.&nbsp;&nbsp; They are used, so I can&#039;t claim that.I&#039;m guessing the original owner didn&#039;t go in there and pull the cap out of the glue, or unsolder the other cap, or work each spade connection till they are loose enough to fall off.&nbsp; I&#039;m new to eaw, so I don&#039;t know what the quality of there workmanship is. ( but who ever was in this box needs to find a new job)&nbsp;Got on the horn with some of the people I talked to earlier, they have seen the same things.&nbsp; Cold hot gluing and things floping around,&nbsp; they soldered every spade connection, as they were loose also.&nbsp; It does say made in mexico on the crossover.&nbsp; Come on, a spade connection of that poor a quality on a box that is going to be used and shipped and trucked around.Should have done what I thought of in the first place, get 2 eaw horns that were in a la 325 and stick them in my 4733&#039;s.. but I couldn&#039;t find a pair.The original owner did say he blew 1 15&#039;&#039;.&nbsp; The la 325 15 is a 804122, he took it to a eaw dealer he said, the other 15, the replaced one, is a 804071, thats out of a la 215, so I don&#039;t know what the difference is there.</blockquote>

[QUOTE="Alan Sledzieski, post: 49498, member: 1022"] Re: Eaw la 325 help needed. They are used, so I can't claim that. I'm guessing the original owner didn't go in there and pull the cap out of the glue, or unsolder the other cap, or work each spade connection till they are loose enough to fall off. I'm new to eaw, so I don't know what the quality of there workmanship is. ( but who ever was in this box needs to find a new job) Got on the horn with some of the people I talked to earlier, they have seen the same things. Cold hot gluing and things floping around, they soldered every spade connection, as they were loose also. It does say made in mexico on the crossover. Come on, a spade connection of that poor a quality on a box that is going to be used and shipped and trucked around. Should have done what I thought of in the first place, get 2 eaw horns that were in a la 325 and stick them in my 4733's.. but I couldn't find a pair. The original owner did say he blew 1 15''. The la 325 15 is a 804122, he took it to a eaw dealer he said, the other 15, the replaced one, is a 804071, thats out of a la 215, so I don't know what the difference is there. [/QUOTE]

Verification