[WTR] EAW MX8750 and / or UX8800

[Silas Pradetto]

I need both of the above so I can copy EAW's settings over to my Itech HDs.

Let me know what you have. I'll pay shipping both ways plus a rental fee if you need.

[email protected] / PM / 8603371040

 

[Langston Holland]

Re: EAW MX8750 and / or UX8800

Hey Silas:

If you still use Smaart, I bet you can get the .ref measurement files you need here without bothering with the MX8750:

www.eaw.com - /info/EAW/Processor_Info/Legacy_Processors/MX8700/MX87xx_Configuration_Files/

Which loudspeakers are you working with in reference to your interest in the UX8800?

 

[Silas Pradetto]

Re: EAW MX8750 and / or UX8800

KF650e / biamped

My intent is to Gunness focus them with Itech HD power. It will happen.

 

[Langston Holland]

Re: EAW MX8750 and / or UX8800

Ha!! It is possible with those amps... If your last name starts with a G.

Those amps also have wonderful processing even without direct coefficient downloads.

I didn't realize you were that ill. Welcome to the substance abuse ward - it's really quite nice in here...

The guy with the pony tail runs the place.

 

[Jeff Babcock]

Re: EAW MX8750 and / or UX8800

KF650e / biamped

My intent is to Gunness focus them with Itech HD power. It will happen.

I think you mean Pradetto focus them, no?
Invite DG and RF to come to your shop for a new Fulcrum product demo, then hold them hostage until you have extracted their wisdom.... a few years later you will emerge victorious.

Back on track, I know Shane P has 2 8800's and did recently still have 2 8750's..... maybe PM him.

 

[Shane Presley]

Re: EAW MX8750 and / or UX8800

Back on track, I know Shane P has 2 8800's and did recently still have 2 8750's..... maybe PM him.

I do have 2 x UX, and 1 x 8750... but I am smack in the middle of "the season" so I didn't offer... if it was winter, that's another story

 

[Silas Pradetto]

Re: EAW MX8750 and / or UX8800

Since EAW refused to provide FIR coefficients to focus these without the 8800, I sold them. I don't have time to mess around with time smear.