Log in
Register
Home
Forums
New posts
Search forums
What's new
Featured content
New posts
New profile posts
Latest activity
News
Members
Current visitors
New profile posts
Search profile posts
Features
Log in
Register
What's new
Search
Search titles only
By:
Search titles only
By:
New posts
Search forums
Menu
Install the app
Install
Reply to thread
Home
Forums
Pro Audio
Varsity
EF500p parts. Dealers , repair center?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Message
<blockquote data-quote="Douglas R. Allen" data-source="post: 100587" data-attributes="member: 71"><p>Re: EF500p parts. Dealers , repair center?</p><p></p><p>Just a follow up. </p><p>Part came in. Just cut the 3 wire ties that hold the wires together that go to the power amp section. Unplug black wire from circuit board that is plugged into the power amp section. Unplug ribbon from power amp section that goes to the circuit board. </p><p>Remove screws and nuts on inputs and remove circuit board. Desolder knob. It has 3 pins and 2 clips on the side as hold downs.</p><p>Replace and reinstall board.</p><p></p><p>The horn driver and woofer are from Italy. Looks like a 12 inch magnet measured top to bottom on the 15 inch woofer with a 6 inch magnet with a 3 inch voice coil for the horn driver.</p><p></p><p>Solid, well built box. </p><p></p><p>I'd give the repair about a 3 1/2 as far as it being difficult. (pretty easy)</p><p></p><p>Douglas R. Allen</p><p></p><p>EDIT: I wanted to add that the new knob shaft was longer than the old one. Before installing be sure to snip it a little shorter to match the old knob !</p></blockquote><p></p>
[QUOTE="Douglas R. Allen, post: 100587, member: 71"] Re: EF500p parts. Dealers , repair center? Just a follow up. Part came in. Just cut the 3 wire ties that hold the wires together that go to the power amp section. Unplug black wire from circuit board that is plugged into the power amp section. Unplug ribbon from power amp section that goes to the circuit board. Remove screws and nuts on inputs and remove circuit board. Desolder knob. It has 3 pins and 2 clips on the side as hold downs. Replace and reinstall board. The horn driver and woofer are from Italy. Looks like a 12 inch magnet measured top to bottom on the 15 inch woofer with a 6 inch magnet with a 3 inch voice coil for the horn driver. Solid, well built box. I'd give the repair about a 3 1/2 as far as it being difficult. (pretty easy) Douglas R. Allen EDIT: I wanted to add that the new knob shaft was longer than the old one. Before installing be sure to snip it a little shorter to match the old knob ! [/QUOTE]
Insert quotes…
Verification
Post reply
Home
Forums
Pro Audio
Varsity
EF500p parts. Dealers , repair center?
Top
Bottom
Sign-up
or
log in
to join the discussion today!
