Hi!
I recently purchased another pair of Cerwin Vega EL36c folded horn subs. One of these needed reconing. I removed the access panel, checked the driver model, and ordered a recone kit. In my haste, I checked the wrong sub.. The other sub was the non-working one and had a different driver. Heh.
I had hoped to use this pair at a upcoming show but don't have any idea what the model of the driver is. It's an EV but I can't find a model number. All I've found is a sticker with 031961 on it.
Anyway, my question.. I have 4 EV TL 3512 subs that came out of a fixed installation. They all have good EV DL18w drivers. I found the specs for these drivers but can't find the specs on the original vega drivers. I'll list the EV specs below. Will they work in a folded horn?
Thanks!
Thiele-Small Parameters (broken in),
fs: 26 Hz
VAS: 553 liters (19.6 ft3)
QES: 0.31
QMS: 7.32
QTS: 0.29
RE: 6.0 ohms
h0: 3.15%
SD: 0.130 m2 (201 in.2)
MMD: 0.130 kg (0.287 lb)
LE: 2.7 mH
CMS: 0.234 mm/N
RMS: 3.50 mechanical ohms
PE(max) (per ANSI/EIA RS-426-A 1980):400 watts
Xmax 2: 5.6 mm (0.22 in.)
Xlim 3: 12.7 mm (0.50 in.)
VD (SD x Xmax): 7.28 liters (0.26 ft3)
Thermal Rise after Power Test: 85 °C (185 °F)
Typical Vented Enclosures (see Typical Enclosure section): 8.0 ft3 tuned to 35 Hz or 12.0 ft3 tuned to 25 Hz
