Reply to thread

Message

<blockquote data-quote="mike bogdanski" data-source="post: 92760" data-attributes="member: 4689">Re: Fire Alarm Cut Off&nbsp;You need to be careful taking on functionality of a fire system, first..........are you a licensed fire systems tech? If not ,DONT TOUCH IT ! Since this is not the U.S.OF A.,you need to find out from a licensed fire alarm company in your area to come out to inspect your layout and let them determine how this can be accomplished.This cannot be your responsibility !&nbsp; The device needed for audible cutoff must be manufactured by a fire systems manufacturer.PERIOD. This device must be tested by U.L.Labs and pass all tests before being put in production.PERIOD. A LICENSED FIRE SYSTEMS TECH MUST INSTALL AND TEST. NOT YOU. This device will be wired in such a way that, for any reason, the fire panel will detect a disconnect of any type,an audible signal will be generated.... A TROUBLE SIGNAL.... and this signal is sent to the monitoring center. The monitoring center must call the location back. You do not want this heavy of a responsibility .IF ,FOR ANY REASON,A FIRE SYSTEM YOU WORKED ON HAS ANY FAILURE( LIKE YOU TYING IN SOME PART YOU THINK MIGHT WORK) AND IT FAILS ,AND PATRONS HERE DONT KNOW ABOUT A FIRE......IF THERE&#039;S ANY LOSS OF LIFE....YOU WILL BE HELD ACCOUNTABLE.YOU CAN GO TO PRISON FOR THIS. This is not something you want. Just speaking from 26 years working on fire systems............now retired..thank GOD.</blockquote>

[QUOTE="mike bogdanski, post: 92760, member: 4689"] Re: Fire Alarm Cut Off You need to be careful taking on functionality of a fire system, first..........are you a licensed fire systems tech? If not ,DONT TOUCH IT ! Since this is not the U.S.OF A.,you need to find out from a licensed fire alarm company in your area to come out to inspect your layout and let them determine how this can be accomplished.This cannot be your responsibility ! The device needed for audible cutoff must be manufactured by a fire systems manufacturer.PERIOD. This device must be tested by U.L.Labs and pass all tests before being put in production.PERIOD. A LICENSED FIRE SYSTEMS TECH MUST INSTALL AND TEST. NOT YOU. This device will be wired in such a way that, for any reason, the fire panel will detect a disconnect of any type,an audible signal will be generated.... A TROUBLE SIGNAL.... and this signal is sent to the monitoring center. The monitoring center must call the location back. You do not want this heavy of a responsibility .IF ,FOR ANY REASON,A FIRE SYSTEM YOU WORKED ON HAS ANY FAILURE( LIKE YOU TYING IN SOME PART YOU THINK MIGHT WORK) AND IT FAILS ,AND PATRONS HERE DONT KNOW ABOUT A FIRE......IF THERE'S ANY LOSS OF LIFE....YOU WILL BE HELD ACCOUNTABLE.YOU CAN GO TO PRISON FOR THIS. This is not something you want. Just speaking from 26 years working on fire systems............now retired..thank GOD. [/QUOTE]

Verification