Reply to thread

Message

<blockquote data-quote="Spenser Hamilton" data-source="post: 12131" data-attributes="member: 2272">Hey everyone,&nbsp;Just firing up a new Flex Array rig for the first time, just wanted to double check my math as we are not using the Turbosound amps.&nbsp;- Powering four flex per side&nbsp;- Processing is LMS-D26&nbsp;- Amps are Crown Microtechs (2400 in stereo for highs, 2400 in stereo for high-mids, and 2 2400 in parallel-mono for low-mids)&nbsp;I&#039;ve set the amp sensitivity to 26dB gain mode for all amps, Turbosound recommends an amp that has 35.75dB of gain, with the passband gain set to -2dB. I have set the passband gain in the processor to +7.8dB for the low-mids(the difference in gain between my amp and the recommended amp, -2dB as recommended by Turbosound), I set the remaining passbands as per Turbosound&#039;s recommendation.Edit: Also, my LMS-D26 only has one user slot available, 1-44 are loaded with factory (locked) presets, has anybody else encountered this?</blockquote>

[QUOTE="Spenser Hamilton, post: 12131, member: 2272"] Hey everyone, Just firing up a new Flex Array rig for the first time, just wanted to double check my math as we are not using the Turbosound amps. - Powering four flex per side - Processing is LMS-D26 - Amps are Crown Microtechs (2400 in stereo for highs, 2400 in stereo for high-mids, and 2 2400 in parallel-mono for low-mids) I've set the amp sensitivity to 26dB gain mode for all amps, Turbosound recommends an amp that has 35.75dB of gain, with the passband gain set to -2dB. I have set the passband gain in the processor to +7.8dB for the low-mids(the difference in gain between my amp and the recommended amp, -2dB as recommended by Turbosound), I set the remaining passbands as per Turbosound's recommendation. Edit: Also, my LMS-D26 only has one user slot available, 1-44 are loaded with factory (locked) presets, has anybody else encountered this? [/QUOTE]

Verification