Reply to thread

Message

<blockquote data-quote="Rob Spence" data-source="post: 51301" data-attributes="member: 80">Re: Flyware on EV QRXI got the L-track parts and loaded them in the tracks. 2 in each track (ie; 2 each speaker). I had thought to get some threaded rod and put short lengths into the track sockets (threadlocked) and then just spin a wingnut or knob down on them. That got foiled when I could not find 3/8-24 wing nuts at the hardware store. So, I got some proper sized bolts.I cut some 3/4&quot; ply to 34x12 and set up the boxes to the splay I wanted. A few measurements later I drilled a few holes and bolted it down to the speakers.I then cut a wedge to fit, glued and screwed it in place. A little sanding and the paint is drying as I write this.I plan to look on line for some threaded knobs or wingnuts to fit and will try that out but I need them this weekend. I got fender washers to take the bearing weight and plan to drill them so I can screw the washers to the wood.I will post some pics after I get them painted.</blockquote>

[QUOTE="Rob Spence, post: 51301, member: 80"] Re: Flyware on EV QRX I got the L-track parts and loaded them in the tracks. 2 in each track (ie; 2 each speaker). I had thought to get some threaded rod and put short lengths into the track sockets (threadlocked) and then just spin a wingnut or knob down on them. That got foiled when I could not find 3/8-24 wing nuts at the hardware store. So, I got some proper sized bolts. I cut some 3/4" ply to 34x12 and set up the boxes to the splay I wanted. A few measurements later I drilled a few holes and bolted it down to the speakers. I then cut a wedge to fit, glued and screwed it in place. A little sanding and the paint is drying as I write this. I plan to look on line for some threaded knobs or wingnuts to fit and will try that out but I need them this weekend. I got fender washers to take the bearing weight and plan to drill them so I can screw the washers to the wood. I will post some pics after I get them painted. [/QUOTE]

Verification