Reply to thread

Message

<blockquote data-quote="Tim Duffin" data-source="post: 68475" data-attributes="member: 400">Re: Growler and other subsYou are mentioning only silicon fab manufacturing.&nbsp; Not mechanical devices of any type.&nbsp; It is true that you can have boards made in China at low cost due to the loose environmental laws.&nbsp; I find it interesting that you believe that the machines which make the silicon devices that you mention are made in China.&nbsp; They are not-- they are ALL made in the united states because chinese businessmen do not trust shoddy chinese etch/clean/fab or sub 25um fab machines made in China.&nbsp; So yes, The assembly line is located in China, comprised of VERY expensive US made fabrication machines.It is obvious that your experience is limited solely to online forums and you have never actually seen a spin/etch machine with your own eyes or even know where they come from, otherwise you would not have made such naive comments.&nbsp;&nbsp; BSS makes their own boards in Sandy Utah, as I have personally seen their fab and wave solder machines with my own eyes and touched them.&nbsp; No part of a BSS product is manufactured in China.</blockquote>

[QUOTE="Tim Duffin, post: 68475, member: 400"] Re: Growler and other subs You are mentioning only silicon fab manufacturing. Not mechanical devices of any type. It is true that you can have boards made in China at low cost due to the loose environmental laws. I find it interesting that you believe that the machines which make the silicon devices that you mention are made in China. They are not-- they are ALL made in the united states because chinese businessmen do not trust shoddy chinese etch/clean/fab or sub 25um fab machines made in China. So yes, The assembly line is located in China, comprised of VERY expensive US made fabrication machines. It is obvious that your experience is limited solely to online forums and you have never actually seen a spin/etch machine with your own eyes or even know where they come from, otherwise you would not have made such naive comments. BSS makes their own boards in Sandy Utah, as I have personally seen their fab and wave solder machines with my own eyes and touched them. No part of a BSS product is manufactured in China. [/QUOTE]

Verification