Reply to thread

Message

<blockquote data-quote="Stephen Findlay" data-source="post: 5251" data-attributes="member: 2047">Good Morning All,Would like to thank you all in advance for your help.&nbsp; This is my first post so here goes...I bought my 2nd 618-XLF about a month ago and hooked it up to PRX 635 tops for a wedding I am doing this weekend.&nbsp; This was the first time I hooked this up and my signal chain is as follows:Mixer (basic Numark mixer with balanced outs) &gt; 618XLF Right In (with crossover set to &quot;IN&quot;) &gt; Right Out to the 635&nbsp; The left 618XLF/635 works fine; and the right 635 works fine.&nbsp; However, there is no sound coming out of the right 618XLF.&nbsp; I notice the signal light flashing green but the blue power light at the front is not on.&nbsp; Could this be a blown fuse?&nbsp; I live about 5 hours away from a service center so I am hoping that this could be an easy fix by replacing a fuse.Thanks again.</blockquote>

[QUOTE="Stephen Findlay, post: 5251, member: 2047"] Good Morning All, Would like to thank you all in advance for your help. This is my first post so here goes...I bought my 2nd 618-XLF about a month ago and hooked it up to PRX 635 tops for a wedding I am doing this weekend. This was the first time I hooked this up and my signal chain is as follows: [B]Mixer (basic Numark mixer with balanced outs) > 618XLF Right In (with crossover set to "IN") > Right Out to the 635[/B] The left 618XLF/635 works fine; and the right 635 works fine. However, there is [U]no sound coming out of the right 618XLF[/U]. I notice the signal light flashing green but the [B]blue power light at the front is not on[/B]. Could this be a blown fuse? I live about 5 hours away from a service center so I am hoping that this could be an easy fix by replacing a fuse. Thanks again. [/QUOTE]

Verification