Reply to thread

Message

<blockquote data-quote="Helge A. Bentsen" data-source="post: 2686" data-attributes="member: 263">Or maybe not <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f609.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=";)" title="Wink&nbsp; &nbsp; ;)"&nbsp; data-smilie="2"data-shortname=";)" />I bought 4 used Labsubs from Silas Pradetto a while back; they arrived here two days ago. They were slightly delayed in a hurricane, but made it through unharmed and well. Initial test suggest that their performance is pretty impressive compared to 4xsb1000 or 4x650-r2 which I&#039;ve previously used with my SH-50s. They outrun two SH-50s pretty easily, and my whole warehouse is shaking in its foundation, I like that.The picture is from our industry standard test procedure FTLC6P, and I ended up with a 12dB Butterworth hi-pass@25hz, an LR24dB LP@80hz on the Labs, and a 24dB LR@100hz on the SH-50s with 5ms of delay. I currently set my limiter at 57V(800W/4ohm) and they seem to cope with that amount of power just fine. If anybody has some settings they wish to recommend for the Labs, I&#039;m open for suggestions.I do believe that this is the first operational Labs in Norway, and they are available for rent if you&#039;re around in these parts of the world <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f609.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=";)" title="Wink&nbsp; &nbsp; ;)"&nbsp; data-smilie="2"data-shortname=";)" />Many thanks to Silas for the deal <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f642.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":)" title="Smile&nbsp; &nbsp; :)"&nbsp; data-smilie="1"data-shortname=":)" /></blockquote>

[QUOTE="Helge A. Bentsen, post: 2686, member: 263"] Or maybe not ;) I bought 4 used Labsubs from Silas Pradetto a while back; they arrived here two days ago. They were slightly delayed in a hurricane, but made it through unharmed and well. Initial test suggest that their performance is pretty impressive compared to 4xsb1000 or 4x650-r2 which I've previously used with my SH-50s. They outrun two SH-50s pretty easily, and my whole warehouse is shaking in its foundation, I like that. The picture is from our industry standard test procedure FTLC6P, and I ended up with a 12dB Butterworth hi-pass@25hz, an LR24dB LP@80hz on the Labs, and a 24dB LR@100hz on the SH-50s with 5ms of delay. I currently set my limiter at 57V(800W/4ohm) and they seem to cope with that amount of power just fine. If anybody has some settings they wish to recommend for the Labs, I'm open for suggestions. I do believe that this is the first operational Labs in Norway, and they are available for rent if you're around in these parts of the world ;) Many thanks to Silas for the deal :) [/QUOTE]

Verification