Reply to thread

Message: <blockquote data-quote="Dick Rees" data-source="post: 41196" data-attributes="member: 16">Re: How do the attributes of a room affect the EQ?Alternatively, you can go back to the "58 in the middle of the room" method I first learned to use.  Put an SM58 on a stand in the middle of the room pointing straight up and about 7' in the air.  Turn the gain up nice and hot on the input, then raise the channel fader until you hear the first "hot" frequency start to ring.  Back off the fader a bit, then (starting at the LF end of your graphic) raise each slider one at a time, noting which ones set off the "ringning".  When you find a hot slider, notch it down a bit.  You'll learn how much over time.  Lather, rinse, repeat.  Primitive, but it works.  The more you do it, the better you get.</blockquote>

Top Bottom