Re: Inadequate Sub Power For a Venue... Tips/Tricks/Help
I have a lot against the TVI Arrays too. And the cheapness in general that seems to happen at that company. I just don't complain because at 17 years old, I'm happy to have a job doing what I like/want to do, on the level I do it at. But I'm not gonna go into a rant about that place on here. I don't take it as harsh at all either. Really only posted this to see if there may be something to save me a little. Never know when someone may know something I don't.
For the spec an apropriate system, trust me. The amount was the least of my worries. I spent last year working on the deployment. http://soundforums.net/junior-varsity/7846-line-array-setup-angle.html
As far as Him paying for repairs, it could cost me my job, as he obviously doesn't have the understanding that he needs on this stuff. Even if the band brings an engineer that destroys everything, well my ass is still on the line I suppose because I "Let" it happen, by not having the proper tools to work with. And I understand what you mean. Ive been trying to explain why the 50A breakers to the 20A plugs on our "Distros" are a bad idea for the last couple years.:roll:
Left the amp in the cabinet. It has an NL2 on the back and an option to run active, or passive. For the crossover......................... I just take a 31 band, and the parametric on the output on the board and turn them basically into into one 30dB crossover. Its about all I can do with it. The x32 doesnt have an adequate crossover built in.
