Re: IT8000 Update & Input gain question
So what is the correct peak voltage I should be using for my cabs?
Here are there specified ratings,
Subs:
1200w @ 4ohms cont. = 70v
2400w @ 4ohms Prog. = 98v
4800w @ 4ohms Peak = 138v
Tops:
1000w @ 8ohms cont. = 90v
2000w @ 8ohms Prog. = 127v
4000w @ 8ohms Peak = 179v
So using the 1/2 RMS limiter method I would be setting my subs at 1200w @ 2ohms (2 subs on 1-channel)
and the tops would be set at 1000w @ 4ohms (2 tops on 1-channel)
