Reply to thread

Message

<blockquote data-quote="Tim Padrick" data-source="post: 97089" data-attributes="member: 99">Re: JBL SRX712m users!!Try these settings (that I got somewhere a while back).Passive PEQ:HPF 62, BW2481Hz, Q=5.706, G=+4.5dB (note this works in conjunction with the HPF)225Hz, Q=4.41, G=+4dB (note some of this is boundery cancellation so flavor gently)500Hz, Q=6.491, G=-3dB1.68kHz, Q=2.035, G=+3dB14.7kHz, Q=5.706, G=-5.5dB (HF response taming, they use a passive lift network that&#039;s excessive IMO)Active:LowsHPF = 91.3Hz, 48dB, LRLPF = 1.22kHz, 24dB, LRGain = 0dBPolarity = +Delay = 0.00msecPEQ:648Hz, Q=3.876, G=+2.5dB1kHz, Q=1.573, G=+2.5dB354Hz, Q=1.382, G=-2.5dBEasyover off, threshold=+3dBHighsHPF = 1.21kHz, 24dB, LRLPF = thruGain = -15dBPolarity = -Delay = 0PEQ:3kHz, Q=2.996, G=-1.5dB2kHz, Q=5.706, G=-2.0dB5.04kHz, Q=4.41, G=-1.5dB11.6kHz, Slope=9, G=-5.5dB (hf lift)</blockquote>

[QUOTE="Tim Padrick, post: 97089, member: 99"] Re: JBL SRX712m users!! Try these settings (that I got somewhere a while back). Passive PEQ: HPF 62, BW24 81Hz, Q=5.706, G=+4.5dB (note this works in conjunction with the HPF) 225Hz, Q=4.41, G=+4dB (note some of this is boundery cancellation so flavor gently) 500Hz, Q=6.491, G=-3dB 1.68kHz, Q=2.035, G=+3dB 14.7kHz, Q=5.706, G=-5.5dB (HF response taming, they use a passive lift network that's excessive IMO) Active: Lows HPF = 91.3Hz, 48dB, LR LPF = 1.22kHz, 24dB, LR Gain = 0dB Polarity = + Delay = 0.00msec PEQ: 648Hz, Q=3.876, G=+2.5dB 1kHz, Q=1.573, G=+2.5dB 354Hz, Q=1.382, G=-2.5dB Easyover off, threshold=+3dB Highs HPF = 1.21kHz, 24dB, LR LPF = thru Gain = -15dB Polarity = - Delay = 0 PEQ: 3kHz, Q=2.996, G=-1.5dB 2kHz, Q=5.706, G=-2.0dB 5.04kHz, Q=4.41, G=-1.5dB 11.6kHz, Slope=9, G=-5.5dB (hf lift) [/QUOTE]

Verification