PA System: $16,000 or Best Offer
(4) JBL SRX728S
(4) EV QRX212/75
(2) EV DC-One Processor
(2) QSC PL325 Amplifier (Horns)
(2) QSC PL340 Amplifier (Mids)
(2) QSC PL380 Amplifier (Subs)
(2) Custom Built Patch Panels with XLR in/thru and NL4 outputs
(8) 10’ 12/4 SOOW Rugged NL4 Cable
(8) 25’ 12/4 SOOW Rugged NL4 Cable
(8) L-Track Studs for Flying QRX Tops
(2) 13-Ply Birch Caster Boards w/ Colson Casters & E-Track Straps
(4) Tuki QRX212 Covers
(2) UnderCover NYC SRX728S Covers
(2) 3-Space Penn-Elcom Rack Door
(2) 4-Space Penn-Elcom Rack Door
(2) 2-Space Penn-Elcom Rack Vent
Also available: +$4,000
(2) R&R 10-Space ESP Racks
(2) Motion Laboratories L14-30 RacPac with Edison Break-In
(2) 25’ 8/4 SOOW L14-30
(2) 50’ 8/4 SOOW L14-30
We’ve decided to go a different direction with PA systems to further standardize our inventory, so with that said, I’m selling the PA that has printed money for us over the last few years. Most of this gear was purchased between 2011 and 2012 and everything is in perfect working order, albeit normal wear and tear.
Comprised of two separate “blocks,” this system was designed with the intention of being a dependable and scalable rig that could be used for anything from corporate events to live sound and school dances to the occasional wedding. Each block consists of a processor, three amps, two subs and two tops. Single block systems of one top over one sub per side are great for smaller events, and when configured as two over two, the system packs a lot of punch for the footprint with minimal comb filtering thanks to the asymmetrical horns. We frequently do school dance with 1500+ in attendance with no issues and plenty of headroom. The full system can be run happily on four 20A circuits, never once tripping a breaker. We’ve never blown a driver, nor have we ever had a failure using this rig. It’s been absolutely rock solid. The tops ride on the subs (and are strapped for transport utilizing the e-track on the caster board), keeping the footprint to a minimum. Setup takes about 5-10 minutes per side, depending on configuration. The tops can be easily flown as one or two per side.
This system has proven to be everything that we wanted and then some with awesome ROI to boot, but with the recent move to an inventory full of self-powered systems, it makes sense for us to go all in since this is the only passive system that remains. I’m open to selling this system either as a whole or without the R&R racks, ML RacPacs and L14-30 since there’s some significant cost wrapped up in this part of the rig, especially being somewhat particular to our infrastructure.
This system is located in Wauconda, IL, about an hour NW of Chicago. PM me or email [email protected] with any questions or picture requests.
Thanks!
(4) JBL SRX728S
(4) EV QRX212/75
(2) EV DC-One Processor
(2) QSC PL325 Amplifier (Horns)
(2) QSC PL340 Amplifier (Mids)
(2) QSC PL380 Amplifier (Subs)
(2) Custom Built Patch Panels with XLR in/thru and NL4 outputs
(8) 10’ 12/4 SOOW Rugged NL4 Cable
(8) 25’ 12/4 SOOW Rugged NL4 Cable
(8) L-Track Studs for Flying QRX Tops
(2) 13-Ply Birch Caster Boards w/ Colson Casters & E-Track Straps
(4) Tuki QRX212 Covers
(2) UnderCover NYC SRX728S Covers
(2) 3-Space Penn-Elcom Rack Door
(2) 4-Space Penn-Elcom Rack Door
(2) 2-Space Penn-Elcom Rack Vent
Also available: +$4,000
(2) R&R 10-Space ESP Racks
(2) Motion Laboratories L14-30 RacPac with Edison Break-In
(2) 25’ 8/4 SOOW L14-30
(2) 50’ 8/4 SOOW L14-30
We’ve decided to go a different direction with PA systems to further standardize our inventory, so with that said, I’m selling the PA that has printed money for us over the last few years. Most of this gear was purchased between 2011 and 2012 and everything is in perfect working order, albeit normal wear and tear.
Comprised of two separate “blocks,” this system was designed with the intention of being a dependable and scalable rig that could be used for anything from corporate events to live sound and school dances to the occasional wedding. Each block consists of a processor, three amps, two subs and two tops. Single block systems of one top over one sub per side are great for smaller events, and when configured as two over two, the system packs a lot of punch for the footprint with minimal comb filtering thanks to the asymmetrical horns. We frequently do school dance with 1500+ in attendance with no issues and plenty of headroom. The full system can be run happily on four 20A circuits, never once tripping a breaker. We’ve never blown a driver, nor have we ever had a failure using this rig. It’s been absolutely rock solid. The tops ride on the subs (and are strapped for transport utilizing the e-track on the caster board), keeping the footprint to a minimum. Setup takes about 5-10 minutes per side, depending on configuration. The tops can be easily flown as one or two per side.
This system has proven to be everything that we wanted and then some with awesome ROI to boot, but with the recent move to an inventory full of self-powered systems, it makes sense for us to go all in since this is the only passive system that remains. I’m open to selling this system either as a whole or without the R&R racks, ML RacPacs and L14-30 since there’s some significant cost wrapped up in this part of the rig, especially being somewhat particular to our infrastructure.
This system is located in Wauconda, IL, about an hour NW of Chicago. PM me or email [email protected] with any questions or picture requests.
Thanks!