Normal
So, I'm running 4 kf730 per side and a single sb730, (w 4 sb1k per side) all grey box settings on the ux. I'm powering with lab Gruppen fp10000Ch a&b on 4 tops and c&d on the sb730 (seperate fp10k amps for subs) I am noticing that the lows are limiting on the kf boxes sooner than everything. What do I need to get that to "stop" more speaker surface, or more power? I was running a Celtic festival at reasonable volume, 85-90 db (estimated) at Foh outside at 60ft. Instrumentation was fiddle/acoustic/keys/vocals/a "foot board" for rhythm.Suggestions?I have 6 tops, and separate the power out into 3 cabs and 3 cabs and again the lows hit first....I thought adding the sb730's would lessen the load , but the 10's are still limiting first...Frustrating...
So, I'm running 4 kf730 per side and a single sb730, (w 4 sb1k per side) all grey box settings on the ux. I'm powering with lab Gruppen fp10000
Ch a&b on 4 tops and c&d on the sb730 (seperate fp10k amps for subs) I am noticing that the lows are limiting on the kf boxes sooner than everything. What do I need to get that to "stop" more speaker surface, or more power? I was running a Celtic festival at reasonable volume, 85-90 db (estimated) at Foh outside at 60ft. Instrumentation was fiddle/acoustic/keys/vocals/a "foot board" for rhythm.
Suggestions?
I have 6 tops, and separate the power out into 3 cabs and 3 cabs and again the lows hit first....
I thought adding the sb730's would lessen the load , but the 10's are still limiting first...
Frustrating...
