I'm thinking about buying one of these, because it’s a 4 channel amp and I would only need to carry a 2 space rack. With this amp, I would be replacing 1 IT4000 and 1 IT8000.
So my question is; do you think I would have a problem running this amp on a 120v/20 amp breaker with my set-up?
I would be running this amp in several different configurations.
Set-up #1 (typical): stereo Left & Right
Ch1: QRx212 (1200w @ 4ohm Program)
Ch2: QRx212 (1200w @ 4ohm Program)
Ch3: SRX728s (3200w @ 4 ohm Program)
Ch4: SRX728s (3200w @ 4 ohm Program)
Set-up #2: small rig.
Ch1: MRX 512m (800w @ 8 ohm Program)
Ch2: MRX 512m (800w @ 8 ohm Program)
Ch3: SRX718s (1600w @ 8 ohm Program)
Ch4: SRX718s (1600w @ 8 ohm Program)
Set-up #3: future plan, as this will be 1 stack per-side. (I might switch to this in the future)
Ch1: QRx212 Horns (150w @ 8 ohm Program)
Ch2: QRx212 12s (1200w @ 4ohm Program)
Ch3: SRX728s (3200w @ 4 ohm Program)
Ch4: SRX728s (3200w @ 4 ohm Program)
