Re: Line Array Carts
Hi there
We have carts for our V series. Rather than the speakers sitting horizontal, all angled to 0 degrees, they have an angled piece in the bottom that matches the cabinet side wall angle. The rest of the cabs just sit directly on top of the first.......
[ATTACH]154467[/ATTACH]
[ATTACH]154468[/ATTACH]
It's the single column carts pictured second that we have, but the double cart pictured shows the bottom better and how the speakers sit.
When in the cart, we only engage the front corner pins to stop the speakers sliding about, but they rest one on top of the other and so there is no compression strain on the flyware or metalwork, the actual wood of the speakers just sits one on top of the other.
The top and poles lift off with quarter turn catches so all 4 speakers can be lifted directly from the cart, and the rear flying connection can 'slide' into place as the speakers lift so a pin can be set into place ahead of time to set the angle, then a second one slid in to lock it into place once it 'catches' as it lifts and is under tension at the correct angle.
We've found it a very quick and flexible system to use.
