Reply to thread

Message: <blockquote data-quote="Max Warasila" data-source="post: 204982" data-attributes="member: 3845"><p>The good news here is that this entire back and forth is irrelevant to the OP's situation, because all of the boxes traces were within a dB or two of each other, which for an imprecise measurement in the near field is more than enough to rule out driver failures. In addition, all of the sharp dips in the traces are at the same points, which means that any reflections were about the same, from either the cabinet or the environment. Point is - sound comes out, and it's plenty close enough to test for his application.</p></blockquote><p></p>

Top Bottom