Reply to thread

Message

<blockquote data-quote="Thomas Dameron" data-source="post: 56816" data-attributes="member: 1098">Re: LS9 - any workarounds for ganging up output mix control?Rob,Most of the ways possible have been mentioned, and they all come with some compromise.&nbsp; If you&#039;re ok getting multiple outputs of the L/R mix (not discreet mixes to ones), then just send the L/R to a bunch of matrixes.&nbsp;&nbsp; Eg. front fills and delays get the same mix as the main.&nbsp; Not always ideal.&nbsp; If you do this, be sure to drive your mains off of a matrix pair too, and not the actual L/R.If it&#039;s just aux subs (or one discrete mix in addition to the main) you can send that mix to the mono bus, link mono to L/R and the outputs will track.&nbsp; However, that&#039;s all you get, no FF plus subs plus L/R tracking.&nbsp; Unless, as Tim mentioned, you use your channel links, but I&#039;m not willing to do a fader only channel link because I&#039;m usually dealing with a bunch of stereo input sources.&nbsp; It would work if you were to go that way, but anything else linked would only have their faders linked, and not sends, gain, eq, etc.Matt,Don&#039;t think you can do this in SM, but:Setup-&gt; preferences-&gt; stereo/mono linkthomas d.</blockquote>

[QUOTE="Thomas Dameron, post: 56816, member: 1098"] Re: LS9 - any workarounds for ganging up output mix control? Rob, Most of the ways possible have been mentioned, and they all come with some compromise. If you're ok getting multiple outputs of the L/R mix (not discreet mixes to ones), then just send the L/R to a bunch of matrixes. Eg. front fills and delays get the same mix as the main. Not always ideal. If you do this, be sure to drive your mains off of a matrix pair too, and not the actual L/R. If it's just aux subs (or one discrete mix in addition to the main) you can send that mix to the mono bus, link mono to L/R and the outputs will track. However, that's all you get, no FF plus subs plus L/R tracking. Unless, as Tim mentioned, you use your channel links, but I'm not willing to do a fader only channel link because I'm usually dealing with a bunch of stereo input sources. It would work if you were to go that way, but anything else linked would only have their faders linked, and not sends, gain, eq, etc. Matt, Don't think you can do this in SM, but: Setup-> preferences-> stereo/mono link thomas d. [/QUOTE]

Verification