Re: Uli Behringer of The Music Group Q&A
Dear Bob,
The stage-plit setup you describe is working correctly, but there is a misunderstanding about assignments of incoming AES50 streams on the DL32 and the physical outputs. DL32 will only put out on XLR 1-16 what is sent to it on AES50 port A channels 1-16, not what is sent to it on AES50 port B. This is predefined and there are no controls on the stage box that allow any routing or configuration.
So in order to put out the IEM streams from the M32C that is connected on Port B, you would need to send those through the DL32 to the M32C that is connected on port A. Note that the upstream signals to port B will be transferred to Port A with shifted channel numbers+32, to make room for the DL32 mic preamp signals.
Hence the IEM signals 1-16 on Port B will appear on the M32C of port A as channels 33-48. Use the FOH-M32C routing options to select those signals for sending back to the DL32 that shall be put out on XLR1-12.
Hope that makes sense.
Best,
Jan
