Re: Uli Behringer of The Music Group Q&A
DL32 stagebox AES50A to MONITOR M32C AES50A. MONITOR M32C AES50B to FOH M32C AES50A
SET YOUR FOH M32C TO SYNC FROM AES50A!
On monitor m32c set AES50B outputs to AES50A 1-8 all the way up to 25-32 to send all of the DL32 inputs coming from AES50A on the monitor m32c to the AES50A inputs on your FOH m32c.
Now, to get Main L/R and Remote speakers from your FOH m32c out of your DL32, do the following:
On your monitor m32c routing homepage set your aux in to remap AES50B 1-4, then go to your out 1-16 tab, scroll down to output 13 and choose direct out aux 1 pre fader, output 14 to direct out aux2 pre fader. These are your remote speaker/matrix outputs. Do the same with output 15-16 but from direct out aux 3 pre fader and direct out aux 4 pre fader. That is now your Main L/R output.
On your FOH m32c go to your P-16 outout page. Select output 1-2 to be your remote/matrix outputs and 3-4 Main L/R outputs.
remember post fader for these.
On your FOH m32c go to your AES50A output page. Here you will send the P-16 out 1-8 to AES50A out-1-8
Now you have Matrix 1-2 and Main L/R out of your DL32 
Now, here`s a neat way to get eight more IEM/wedge mixes out of your system.
On monitor m32c go to the xlr out tab in your routing menu and select AES50 B9-12 on outputs 1-4 and AES50 B13-16 on the output 5-8
On your FOH mixer go to routing menu and AES50A tab, on AES50A outputs 9-16 select out 1-8
Now you have 8 more outputs for wedges and stuff from your 8 xlr outs on the back of the monitor m32c. Sendt from your FOH bus 1-8
Henning
