Good morning everyone,
and congratulations for the very interesting information on the forum.
I ask you for a suggestion and help to correctly configure the routing of my setup:
FOH:
M32C
SD8 (AES50-B)(for inserting audio from players or PCs). The SD8 outputs can be used for control room monitoring.
STAGE:
DL16 (AES50-A)
All XLR inputs are used for musicians and singers.
The outputs are used for the 6 wedges and the Master LR
How do you recommend setting up the routing?
For inputs I selected
AES50-A
Sources 1-8 Channels 1-8
Source 9-16 Channel 9-16
AES50-B
Sources 1-8 Channels 17-24
And everything works
I'm a bit confused about the outputs though...
I would also need help configuring the mixbus to be able to manage monitors, main LR and Fx
Thanks so much for the help
