Reply to thread

Message

<blockquote data-quote="Jon Hoffmann" data-source="post: 10483" data-attributes="member: 1984">Hi guys (and gals!) - First off, I am an audio guy, not lighting.&nbsp; Just wanted to put that out there :razz: Have a question for any lighting folks around these parts - I have an Atomic Strobe (120v) and the lamp went out in it.&nbsp; There is a LED on the back that indicates when it has a bad lamp.&nbsp; Today we bought a new flash tube for it and replaced it but the LED stays lit indicating a bad tube.&nbsp; I don&#039;t know where to look to start troubleshooting this other than send it back and get it repaired - has anyone run across this at all?&nbsp; Have another identical one working fine.Any advice would be awesome - especially if that advice happened to come with the Atomic service manual <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f642.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":)" title="Smile&nbsp; &nbsp; :)"&nbsp; data-smilie="1"data-shortname=":)" />Thanks!Jon</blockquote>

[QUOTE="Jon Hoffmann, post: 10483, member: 1984"] Hi guys (and gals!) - First off, I am an audio guy, not lighting. Just wanted to put that out there :razz: Have a question for any lighting folks around these parts - I have an Atomic Strobe (120v) and the lamp went out in it. There is a LED on the back that indicates when it has a bad lamp. Today we bought a new flash tube for it and replaced it but the LED stays lit indicating a bad tube. I don't know where to look to start troubleshooting this other than send it back and get it repaired - has anyone run across this at all? Have another identical one working fine. Any advice would be awesome - especially if that advice happened to come with the Atomic service manual :) Thanks! Jon [/QUOTE]

Verification