Reply to thread

Message

<blockquote data-quote="Johnny Royn" data-source="post: 213143" data-attributes="member: 13654">Mark Levinson No. 585 Integrated Amplifier at 4200$Up for sale is a must mint like new ML #585 with low hours. This unit has zero blemishes, remote still has plasticon it. Comes with all original accessories and packaging.Output Power: 200W RMS per channel @ 8 O, 20Hz – 20kHzDamping Factor: &gt;400 @ 20Hz, referred to 8 OFrequency Response: 20Hz – 20kHz, ±0.13dB; 2Hz – 250kHz, +0.2dB/–3dBSignal-to-Noise Ratio: &gt;98dB (20Hz – 20kHz, unweighted); &gt;103dB (20Hz – 20kHz, A-wtd), referred to full output –maximum volume settingVoltage Gain: 40.7dB (maximum volume setting)Total Harmonic Distortion: &lt;0.01% @ 1kHz, 200W, 8 O; &lt;0.1% @ 20kHz, 200W, 8 OPREAMPLIFIER SECTION: ANALOGInput Impedance: &gt;45k O (RCA &amp; XLR)Input Overload: &gt;5.5V RMS (RCA &amp; XLR)PREAMPLIFIER SECTION: DIGITALSample Rates/Bit Depth: PCM: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz/up to 32-bit; DSD: Native,single- and double-speedGENERALAnalog Audio Connectors: 3 pairs single-ended inputs (RCA); 1 pair balanced inputs (XLR); 1 pair single-ended lineoutputs (RCA); 1 pair loudspeaker outputs (&quot;Hurricane&quot; binding posts w/banana sockets that accept spade lugs with1/4&quot; (6.3mm) spacing up to 1/8&quot; (3mm) thick)Digital Audio Connectors: 1 balanced AES/EBU input (XLR); 2 coaxial S/PDIF inputs (RCA); 2 optical inputs (Tos-Link); 1 asynchronous USB input (USB-B)Control Connectors: 1 RS-232 port (RJ-12 connector); 1 IR input (1/8&quot; phone jack); 1 programmable 12V DC triggeroutput (1/8&quot; phone jack), 100mA maximum; 1 programmable 12 DC trigger input (1/8&quot; phone jack); 1 Ethernet port(RJ-45 connector)Mains Voltage: 100V AC, 115V AC, or 230V AC (factory-set)Power Consumption: Maximum 1000W (power on)Unit Dimensions (H x W x D): 6.9&quot; (175mm) – without feet; 7.59&quot; (193mm) – with feet x 17.25&quot; (438mm) x 19.95&quot;(507mm)Packaging Dimensions (H x W x D): 19&quot; (483mm) x 26&quot; (660mm) x 26&quot; (660mm)Weight: 72 lb (32.6kg) – net; 96 lb (43.4kg) – with packaging<a href="mailto:jroy6875@gmail.com">jroy6875@gmail.com</a></blockquote>

[QUOTE="Johnny Royn, post: 213143, member: 13654"] Mark Levinson No. 585 Integrated Amplifier at 4200$ Up for sale is a must mint like new ML #585 with low hours. This unit has zero blemishes, remote still has plastic on it. Comes with all original accessories and packaging. Output Power: 200W RMS per channel @ 8 O, 20Hz – 20kHz Damping Factor: >400 @ 20Hz, referred to 8 O Frequency Response: 20Hz – 20kHz, ±0.13dB; 2Hz – 250kHz, +0.2dB/–3dB Signal-to-Noise Ratio: >98dB (20Hz – 20kHz, unweighted); >103dB (20Hz – 20kHz, A-wtd), referred to full output – maximum volume setting Voltage Gain: 40.7dB (maximum volume setting) Total Harmonic Distortion: <0.01% @ 1kHz, 200W, 8 O; <0.1% @ 20kHz, 200W, 8 O PREAMPLIFIER SECTION: ANALOG Input Impedance: >45k O (RCA & XLR) Input Overload: >5.5V RMS (RCA & XLR) PREAMPLIFIER SECTION: DIGITAL Sample Rates/Bit Depth: PCM: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz/up to 32-bit; DSD: Native, single- and double-speed GENERAL Analog Audio Connectors: 3 pairs single-ended inputs (RCA); 1 pair balanced inputs (XLR); 1 pair single-ended line outputs (RCA); 1 pair loudspeaker outputs ("Hurricane" binding posts w/banana sockets that accept spade lugs with 1/4" (6.3mm) spacing up to 1/8" (3mm) thick) Digital Audio Connectors: 1 balanced AES/EBU input (XLR); 2 coaxial S/PDIF inputs (RCA); 2 optical inputs (Tos- Link); 1 asynchronous USB input (USB-B) Control Connectors: 1 RS-232 port (RJ-12 connector); 1 IR input (1/8" phone jack); 1 programmable 12V DC trigger output (1/8" phone jack), 100mA maximum; 1 programmable 12 DC trigger input (1/8" phone jack); 1 Ethernet port (RJ-45 connector) Mains Voltage: 100V AC, 115V AC, or 230V AC (factory-set) Power Consumption: Maximum 1000W (power on) Unit Dimensions (H x W x D): 6.9" (175mm) – without feet; 7.59" (193mm) – with feet x 17.25" (438mm) x 19.95" (507mm) Packaging Dimensions (H x W x D): 19" (483mm) x 26" (660mm) x 26" (660mm) Weight: 72 lb (32.6kg) – net; 96 lb (43.4kg) – with packaging [EMAIL]jroy6875@gmail.com[/EMAIL] [/QUOTE]

Verification