Reply to thread

Message

<blockquote data-quote="Brian Wynn" data-source="post: 63493" data-attributes="member: 113">Re: Midas Pro 1All good points Kristian now I understand why I don&#039;t do it:I don&#039;t compress my main mix busIf I need more than 6 bands of parametric eq for the main outs then I have bigger problems.I don&#039;t use subgroups.&nbsp; Only VCA&#039;sThis one I don&#039;t understand because regardless of the muted or un-muted Matrix out&#039;s your still listening to the L/R bus though the Matrix depending on its mute state. Right?I&#039;m not trying to knock your method I&#039;m just stating that I personally have no use for it.Now if I&#039;m forced to do it on the Pro1 so that I can &quot;unlink&quot; or &quot;link&quot; the L/R then maybe I need to think about a Pro2C instead. Because it can do it.I just Checked the software and it appears that you can not link Matrix outs together other than the with the single matrix to it&#039;s left.&nbsp; So in other words you can not link three matrix outs to track together.&nbsp; So the problem is still not solved.I&#039;m sure it&#039;s just something they missed in the software build &quot;I hope&quot; because it is possible to link L/R/Mono together in generation 1 software but not generation 2 and all the other Pro series desk will allow a L/R/Mono link.</blockquote>

[QUOTE="Brian Wynn, post: 63493, member: 113"] Re: Midas Pro 1 All good points Kristian now I understand why I don't do it: I don't compress my main mix bus If I need more than 6 bands of parametric eq for the main outs then I have bigger problems. I don't use subgroups. Only VCA's This one I don't understand because regardless of the muted or un-muted Matrix out's your still listening to the L/R bus though the Matrix depending on its mute state. Right? I'm not trying to knock your method I'm just stating that I personally have no use for it. Now if I'm forced to do it on the Pro1 so that I can "unlink" or "link" the L/R then maybe I need to think about a Pro2C instead. Because it can do it. I just Checked the software and it appears that you can not link Matrix outs together other than the with the single matrix to it's left. So in other words you can not link three matrix outs to track together. So the problem is still not solved. I'm sure it's just something they missed in the software build "I hope" because it is possible to link L/R/Mono together in generation 1 software but not generation 2 and all the other Pro series desk will allow a L/R/Mono link. [/QUOTE]

Verification