Reply to thread

Message

<blockquote data-quote="Evan Kirkendall" data-source="post: 76809" data-attributes="member: 5">Re: Midas Pro1 TutorialRandy- A Red status light means that something isn&#039;t configured properly. Again, recalling your &quot;safe&quot; preset is the best way to start from scratch and make sure the basics are set properly.Press the automation / filing button. You&#039;ll see one of 2 screens. The first screen will have a big white box on the left hand side, and nothing on the right hand side. You do not want this screen- you want the screen with the big black box in the top center displaying the time, and a list below it. In that list, scene 0 will be the &quot;Safe&quot; scene. Click on it, and hit the &quot;now&quot; button. It will prompt you that you&#039;re about to recall the safe scene, click ok. You have successfully recalled the &quot;safe&quot; scene with basic patching in place.If your status light does not change to green after that, click on the status light. You&#039;ll see the console surface on the left hand side(Which should be green), and then 2 columns to the right of that: &quot;configured&quot; and &quot;un-configured.&quot; If your stage box is in the &quot;un-configured&quot; slot, then that&#039;s your problem. We&#039;ll get into that after you recall the safe scene though- that should solve all of your issues.</blockquote>

[QUOTE="Evan Kirkendall, post: 76809, member: 5"] Re: Midas Pro1 Tutorial Randy- A Red status light means that something isn't configured properly. Again, recalling your "safe" preset is the best way to start from scratch and make sure the basics are set properly. Press the automation / filing button. You'll see one of 2 screens. The first screen will have a big white box on the left hand side, and nothing on the right hand side. You do not want this screen- you want the screen with the big black box in the top center displaying the time, and a list below it. In that list, scene 0 will be the "Safe" scene. Click on it, and hit the "now" button. It will prompt you that you're about to recall the safe scene, click ok. You have successfully recalled the "safe" scene with basic patching in place. If your status light does not change to green after that, click on the status light. You'll see the console surface on the left hand side(Which should be green), and then 2 columns to the right of that: "configured" and "un-configured." If your stage box is in the "un-configured" slot, then that's your problem. We'll get into that after you recall the safe scene though- that should solve all of your issues. [/QUOTE]

Verification