The weather let me test outside a little today, so I started with the biggest concern,
......off axis vertical. Started with a single stack.
First plot is on-axis, then down 10, 20, and 30 degrees.
Second is on-axis, but with up 10, and 20. Can't see ever needing up 30...
Showing two plots cause all together it's too messy to see anything IMO. 1/3 oct trying to get big picture first
Trying to sort out some junk around mid to high x-over at 650Hz, but measurements are at only 9ft which may be too close not to have junk.
Dunno...step at a time...but happy so far..
Down axis
[ATTACH=full]208574[/ATTACH]
Up axis
[ATTACH=full]208575[/ATTACH]
