Reply to thread

Message

<blockquote data-quote="Rick Stansby" data-source="post: 22924" data-attributes="member: 312">Re: More StudioLive surprises. <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f641.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":(" title="Frown&nbsp; &nbsp; :("&nbsp; data-smilie="3"data-shortname=":(" />Today I went back to the shop to try to recreate the problems that Brian and I had.I was not able to recreate the audio drop outs that Brian mentioned.&nbsp; I synced the laptop to the SL24, then I quit the program, and restarted the PC.&nbsp; The SL 24 cruised along passing audio the whole time.&nbsp; I&#039;m not saying that it didn&#039;t happen to Brian, but I couldn&#039;t reproduce it.*I was able to easily recreate 2 problems I experienced at my show. 1) I synced the PC to the SL24, then started the iPad app.&nbsp; I saw the connect button for the mixer (with the correct ip address for the laptop).&nbsp; I hit connect, but I was put into demo mode, with no connection to the mixer.I had to &quot;kill&quot; the iPad app and restart it to get a good connection.&nbsp; This happened the very first time I tried to sync today, and 2 more times after that.2) If I turn a fader all the way down in the iPad app, I cannot &quot;properly&quot; locate the fader position when I return to the mixer.&nbsp; I press the locate button, and pull the fader down (to the correct position), but the locate function on the mixer thinks I need to turn it down more.&nbsp; It is physically impossible to pull the fader any farther down.&nbsp; Fortunately ignoring the incorrect reading solves the problem, so this is a minor issue.One last complaint I have is that I can&#039;t see gain reduction in the SL app.&nbsp; Maybe that feature exists, and I missed it.*I also tried pulling the firewire cable while the program was synced to the mixer.&nbsp; Again, the mixer cruised along, as if I hadn&#039;t done a thing.</blockquote>

[QUOTE="Rick Stansby, post: 22924, member: 312"] Re: More StudioLive surprises. :( Today I went back to the shop to try to recreate the problems that Brian and I had. I was not able to recreate the audio drop outs that Brian mentioned. I synced the laptop to the SL24, then I quit the program, and restarted the PC. The SL 24 cruised along passing audio the whole time. I'm not saying that it didn't happen to Brian, but I couldn't reproduce it.* I was able to easily recreate 2 problems I experienced at my show. 1) I synced the PC to the SL24, then started the iPad app. I saw the connect button for the mixer (with the correct ip address for the laptop). I hit connect, but I was put into demo mode, with no connection to the mixer. I had to "kill" the iPad app and restart it to get a good connection. This happened the very first time I tried to sync today, and 2 more times after that. 2) If I turn a fader all the way down in the iPad app, I cannot "properly" locate the fader position when I return to the mixer. I press the locate button, and pull the fader down (to the correct position), but the locate function on the mixer thinks I need to turn it down more. It is physically impossible to pull the fader any farther down. Fortunately ignoring the incorrect reading solves the problem, so this is a minor issue. One last complaint I have is that I can't see gain reduction in the SL app. Maybe that feature exists, and I missed it. *I also tried pulling the firewire cable while the program was synced to the mixer. Again, the mixer cruised along, as if I hadn't done a thing. [/QUOTE]

Verification