Re: My first blown speaker (sigh)
Thanks Mike, Robert and Bennett for the links.
Mike - the tinsel leads looked to be intact - I did not remove the dust cover.
Robert - yes, I measured for DC voice coil resistance - the voice coil was open.
Bennett - I've looked at your pages in the past and the pictures - I'm guessing its time for review.
Having never done this, I'm assuming cutting out the cone and spider will have no effect on the future ability to recone the speaker (I know it will eventually be done by repair, but I did not know if there is something I should not do...)
thanks - evening project. I'll post pictures.
