Reply to thread

Message

<blockquote data-quote="Peter Morris" data-source="post: 137335" data-attributes="member: 652">Re: New DIY Mid HighFWIW here is a standard 4594 on an RCF HF950 with a passive crossover. Also a comment about my folded horn .... its more of a gentile bend than a fold :razz:&nbsp; and the dimensions are such that it will work up to 800Hz.&nbsp; The response closely matched the modelled straight horn....and just because you mentioned Tony - a similar bend with a 12&quot;&nbsp; <a href="http://www.funktion-one.com/products/resolution-4-touring/" target="_blank">hhttp://www.funktion-one.com/products/resolution-4-touring/</a> <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f609.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=";)" title="Wink&nbsp; &nbsp; ;)"&nbsp; data-smilie="2"data-shortname=";)" />~;-)~:wink: ... and BTW the DIY is 13 Kgs lighter and LF section has the same efficiency (105dB) but takes more than 6dB of drive .... just hope the 4594 can keep up.Note: the divisions are 5 dB</blockquote>

[QUOTE="Peter Morris, post: 137335, member: 652"] Re: New DIY Mid High FWIW here is a standard 4594 on an RCF HF950 with a passive crossover. Also a comment about my folded horn .... its more of a gentile bend than a fold :razz: and the dimensions are such that it will work up to 800Hz. The response closely matched the modelled straight horn. ...and just because you mentioned Tony - a similar [B]bend[/B] with a 12" [URL="http://www.funktion-one.com/products/resolution-4-touring/"]hhttp://www.funktion-one.com/products/resolution-4-touring/[/URL] ;)~;-)~:wink: ... and BTW the DIY is 13 Kgs lighter and LF section has the same efficiency (105dB) but takes more than 6dB of drive .... just hope the 4594 can keep up. [I]Note: the divisions are 5 dB[/I] [/QUOTE]

Verification