Normal
Re: New DIY Mid HighThe FIR settings are quite complex.:?~:-?~:???: In comparison the IIR setting are relatively simple, however I want to do them again with the box flown before I post them.These settings produce a flat amplitude response from about 80Hz to 20 KHz. The phase response flat from 300 Hz up. In addition I have added a some group EQ -2 to -3 dB centred at 3.1 KHz and a very gentle shelving filter +3dB at 100Hz tapering off to zero at about 500 Hz. This is a personal "taste" EQ, so apply as you like.Note: the Mid and Hi amp gains are 26 dB, the low gain was set to 35 dB. LM 26 FIR time 2.5ms
Re: New DIY Mid High
The FIR settings are quite complex.:?~:-?~:???: In comparison the IIR setting are relatively simple, however I want to do them again with the box flown before I post them.
These settings produce a flat amplitude response from about 80Hz to 20 KHz. The phase response flat from 300 Hz up.
In addition I have added a some group EQ -2 to -3 dB centred at 3.1 KHz and a very gentle shelving filter +3dB at 100Hz tapering off to zero at about 500 Hz. This is a personal "taste" EQ, so apply as you like.
Note: the Mid and Hi amp gains are 26 dB, the low gain was set to 35 dB. LM 26 FIR time 2.5ms
