Reply to thread

Message

<blockquote data-quote="Peter Morris" data-source="post: 138812" data-attributes="member: 652">Re: New DIY Mid HighYes I think you need to do that ... I machined a lot more off the inside horn corner and made the radius bigger. That effectively made the panel thinner so the plate the 12 is mounted on could be a little wider and there was slightly more space for the 12s.In addition there needs to be some bracing between the back of the box and the centre enclosure and the top of the box and the centre of the enclosure ....and thanks once again - fantastic.</blockquote>

[QUOTE="Peter Morris, post: 138812, member: 652"] Re: New DIY Mid High [COLOR=#222222][FONT=Verdana]Yes I think you need to do that ... I machined a lot more off the inside horn corner and made the radius bigger. That effectively made the panel thinner so the plate the 12 is mounted on could be a little wider and there was slightly more space for the 12s. In addition there needs to be some bracing between the back of the box and the centre enclosure and the top of the box and the centre of the enclosure ....and thanks once again - fantastic.[/FONT][/COLOR] [/QUOTE]

Verification