Normal
I get it that you minimize the reflections by measuring ground plane but I'm not understanding what these measurements can be used for? At low frequencies I get weird response partially due to the D'appolito arrangement? The High frequency is off- axis and also suffer from timing issues at XO ? I am bit lost here. Need to study more :0)Enclosed measurement of speaker standing on the ground and mike 1 meter distance on the ground. (IR window 10ms and 1/24 smoothing. XO at 700/48db LP 100/24.[ATTACH]204114[/ATTACH]Is this the best baseline for adding PEQ and so?I made PEQ's based on measurments made with the speaker laying flat on the back and mike 1m above, and was able to make it relatively flat (+12 db), - but the sound was really no good for me :0/.
I get it that you minimize the reflections by measuring ground plane but I'm not understanding what these measurements can be used for? At low frequencies I get weird response partially due to the D'appolito arrangement? The High frequency is off- axis and also suffer from timing issues at XO ? I am bit lost here. Need to study more :0)
Enclosed measurement of speaker standing on the ground and mike 1 meter distance on the ground. (IR window 10ms and 1/24 smoothing. XO at 700/48db LP 100/24.
[ATTACH]204114[/ATTACH]
Is this the best baseline for adding PEQ and so?
I made PEQ's based on measurments made with the speaker laying flat on the back and mike 1m above, and was able to make it relatively flat (+12 db), - but the sound was really no good for me :0/.
