Reply to thread

Hi Andy,

Have a look at post 315  https://soundforums.net/forum/low-earth-orbit/diy-audio/11601-new-diy-mid-high/page21

and posts 23 (double 10 box)  for the passive crossover version of a standard 4594 / HF950 https://soundforums.net/forum/low-earth-orbit/diy-audio/13224-double-10-and-horn/page2

Something is wrong with the results you are getting …

Suggestions:

- Check the crossover is correct – what value are the two capacitors?  What impedance is the 4594?

- Check the time alignment between the low section a HF – the HF should be delayed about 1.5ms.

Peter