Normal
The search function found me a link in the threads to a drop box link of the plans i used to build mine, it took 60 seconds from hitting enter to viewing the plans. The only thing to note is that you may need to stretch the design just slightly to fit teh B&C coaxial(between teh mid dirvers) instead of the BMS coaxial the design was designed for(both drivers work fine), i think this just applies when using the 60 degree horn though I cant remember exactly. Good Luck.https://www.dropbox.com/s/h16is6mbjig6fcy/pm90_current.pdf?dl=0https://www.dropbox.com/s/8vvhnwc5x73eos1/pm90_current.dwg?dl=0Theres is one other thing worth mentioning. The pole mount location is not centered as far as weight is concerned, there is more weight behind the pole mount so this may be something you will need to adjust if you intend to use a pole mount.
The search function found me a link in the threads to a drop box link of the plans i used to build mine, it took 60 seconds from hitting enter to viewing the plans. The only thing to note is that you may need to stretch the design just slightly to fit teh B&C coaxial(between teh mid dirvers) instead of the BMS coaxial the design was designed for(both drivers work fine), i think this just applies when using the 60 degree horn though I cant remember exactly. Good Luck.
https://www.dropbox.com/s/h16is6mbjig6fcy/pm90_current.pdf?dl=0
https://www.dropbox.com/s/8vvhnwc5x73eos1/pm90_current.dwg?dl=0
Theres is one other thing worth mentioning. The pole mount location is not centered as far as weight is concerned, there is more weight behind the pole mount so this may be something you will need to adjust if you intend to use a pole mount.
