Log in
Register
Home
Forums
New posts
Search forums
What's new
New posts
New profile posts
Latest activity
News
Members
Current visitors
New profile posts
Search profile posts
Features
Log in
Register
Search
Search titles only
By:
Search titles only
By:
New posts
Search forums
Menu
Install the app
Install
Reply to thread
Home
Forums
Low Earth Orbit
DIY Audio
New DIY Mid High (90deg) - AKA PM90
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Message
<blockquote data-quote="jami schorling" data-source="post: 217860" data-attributes="member: 13511"><p>Find here the: <a href="https://cloud.irgendwas247.de/s/6rFdQqcYjjnLG8L" target="_blank"><strong>3D Plans</strong></a></p><p></p><p>Few notes:</p><p>- The pockets are drawn without margin. If you cut them with a CNC mill, make sure to program it with bigger radius (like +0,5-1mm), otherwise you won't be able to fit in the panels during assembly. The wood will swell under the glue and fill in the gaps. I did not include any margin and this caused me a lot of pain, because I literally had to hammer in the panels under time pressure, once glue was applied.</p><p>- You might wanna correct the handle cutouts. These are based on PM/MW original choice, but I did not enjoy the handling. There are cheaper and more comfortable handles out imho, so you might choose different ones and adjust the cutout. Same goes for the Pole Mount.</p><p>- The position of the Pole Mount is not exactly positioned in center of gravity, as least for the combination of D</p><p>DCX464 + 12NDL76, my cabinets lean very slightly backwards.</p><p>- The Cutout for the Horn could be made a few mm smaller, so th bolt nuts have more grip. I found Max Warasilas measures quite tight. Maybe check again, if there is an official cutout specification.</p></blockquote><p></p>
[QUOTE="jami schorling, post: 217860, member: 13511"] Find here the: [URL='https://cloud.irgendwas247.de/s/6rFdQqcYjjnLG8L'][B]3D Plans[/B][/URL] Few notes: - The pockets are drawn without margin. If you cut them with a CNC mill, make sure to program it with bigger radius (like +0,5-1mm), otherwise you won't be able to fit in the panels during assembly. The wood will swell under the glue and fill in the gaps. I did not include any margin and this caused me a lot of pain, because I literally had to hammer in the panels under time pressure, once glue was applied. - You might wanna correct the handle cutouts. These are based on PM/MW original choice, but I did not enjoy the handling. There are cheaper and more comfortable handles out imho, so you might choose different ones and adjust the cutout. Same goes for the Pole Mount. - The position of the Pole Mount is not exactly positioned in center of gravity, as least for the combination of D DCX464 + 12NDL76, my cabinets lean very slightly backwards. - The Cutout for the Horn could be made a few mm smaller, so th bolt nuts have more grip. I found Max Warasilas measures quite tight. Maybe check again, if there is an official cutout specification. [/QUOTE]
Insert quotes…
Verification
Post reply
Home
Forums
Low Earth Orbit
DIY Audio
New DIY Mid High (90deg) - AKA PM90
Top
Bottom
Sign-up
or
log in
to join the discussion today!