Reply to thread

Message

<blockquote data-quote="Arik Semagin" data-source="post: 115050" data-attributes="member: 5072">Re: New Midas M32 ConsoleQuestions for all the tech heads: assuming that M32 is indeed a 96K desk all the way from stagebox to console,The AES50 can carry 48 channels in each direction at 48K, but only 24 at 96K (all MIDAS 96K 3-digit DL stageboxes require one AES50 per each 24 channels, as does Klark Teknik DN9696 hard disk recorder, it takes four (!) AES50 lines to utilize all of its 96 tracks at 96K).Question 1: How it is possible to get 32 downstream channels from two DL16 stageboxes (presumably running at 96K) to M32 over a single cable (between AES50 A port on M32 and A port on DL16, with B port on first DL16 connected to A port on second DL16)?Question 2: If we would have to use BOTH AES50 A and B ports on the M32 and the first DL16, running two CAT5 cables in parallel (not a big deal really), then how we are supposed to connect a second DL16 stagebox?Any ideas on this?</blockquote>

[QUOTE="Arik Semagin, post: 115050, member: 5072"] Re: New Midas M32 Console [B]Questions for all the tech heads:[/B] assuming that M32 is indeed a 96K desk all the way from stagebox to console, The AES50 can carry 48 channels in each direction at 48K, but only 24 at 96K (all MIDAS 96K 3-digit DL stageboxes require one AES50 per each 24 channels, as does Klark Teknik DN9696 hard disk recorder, it takes four (!) AES50 lines to utilize all of its 96 tracks at 96K). [B]Question 1[/B]: How it is possible to get 32 downstream channels from two DL16 stageboxes (presumably running at 96K) to M32 over a single cable (between AES50 A port on M32 and A port on DL16, with B port on first DL16 connected to A port on second DL16)? [B]Question 2[/B]: If we would have to use BOTH AES50 A and B ports on the M32 and the first DL16, running two CAT5 cables in parallel (not a big deal really), then how we are supposed to connect a second DL16 stagebox? Any ideas on this? [/QUOTE]

Verification