Reply to thread

Message

<blockquote data-quote="Robert Lofgren" data-source="post: 129722" data-attributes="member: 2447">Re: New Midas M32 ConsoleWell, it&#039;s hardly the x32&#039;s fault that the mix/monitor position sucks and that the ipad is down..Looking at what you wrote and if this was the way I had to mix I&#039;d probably assign the fx mute and sends to the udk&#039;s so it is accessible all the time.I&#039;d then operate the right side mostly with dca&#039;s. The left side would have the 4&#039;th layer selected so that all mixbuses were available for monitor duties and/or submixes.So when the need comes to adjust the bass monitor I&#039;d just select the proper mixbus and grab the dedicated eq-controls to the left of the lcd. If I need to view the eq/rta I&#039;d just as easily press the view-button on the eq control section.So with a &#039;proper&#039; setup the needed steps are1) Press select on left fader bank2) Adjust the eq using the dedicated controls3) Optional. Press view to look at eq-curve and rta. When finished click view again to return to your previous view.This, while having access to the right hand dca&#039;s for mixing duties, left hand have access to all monitor levels + submixes and the udk&#039;s for fx control.Looking at the ever so popular ls-9, how would you address your mixing issue described above?</blockquote>

[QUOTE="Robert Lofgren, post: 129722, member: 2447"] Re: New Midas M32 Console Well, it's hardly the x32's fault that the mix/monitor position sucks and that the ipad is down.. Looking at what you wrote and if this was the way I had to mix I'd probably assign the fx mute and sends to the udk's so it is accessible all the time. I'd then operate the right side mostly with dca's. The left side would have the 4'th layer selected so that all mixbuses were available for monitor duties and/or submixes. So when the need comes to adjust the bass monitor I'd just select the proper mixbus and grab the dedicated eq-controls to the left of the lcd. If I need to view the eq/rta I'd just as easily press the view-button on the eq control section. So with a 'proper' setup the needed steps are 1) Press select on left fader bank 2) Adjust the eq using the dedicated controls 3) Optional. Press view to look at eq-curve and rta. When finished click view again to return to your previous view. This, while having access to the right hand dca's for mixing duties, left hand have access to all monitor levels + submixes and the udk's for fx control. Looking at the ever so popular ls-9, how would you address your mixing issue described above? [/QUOTE]

Verification