Opinion please

[Shane Presley]

I am quoting on a big (for me) show... and I'm wondering if I have enough bottom end power....
The BE is looking for 8 SB1000zs, UNDER (lol) 12 KF730 per side....

I'm okay with the 730 power, but I'm wondering would 4 PL380's run the bottom end (two per side) - or am I asking for trouble?

I have 2 PL6.0II in the wings

2 x 80's rock band is the program (national)

 

[Evan Kirkendall]

Re: Opinion please

The PL380 is what, 4kw at 2 ohms? So, that's about 1kw per driver? Not too bad IMO. As long as the amps can handle the load, and you have enough A/C, I think you'll be fine.



Evan

 

[Silas Pradetto]

Re: Opinion please

I want to see the subs flown over the tops! Should be interesting!

 

[Shane Presley]

Re: Opinion please

The PL380 is what, 4kw at 2 ohms? So, that's about 1kw per driver? Not too bad IMO. As long as the amps can handle the load, and you have enough A/C, I think you'll be fine.



Evan

That is the correct spec, and I will be supplying each amp with it's required a/c draw (30 amps) using 2 x 30 amp 240

 

[Tim McCulloch]

Re: Opinion please

Well, one flew over the cuckoo's nest!

 

[Shane Presley]

Re: Opinion please

Well, one flew over the cuckoo's nest!

ONE flew into my B pa rack to run 4 tx-9's... temporarily (pl6.0) I assume

 

[Shane Presley]

Re: Opinion please

Nevermind. I found that the provider im getting the other hang from has pl380 racks
Better safe than sorry. 4 per side it is (on bottom).