Re: Phase align subs to mains
Subs should be the last thing that you try to do an alignment on.
Once you have the mids and highs acting nice with each other, move on to the subs. For a quick and dirty alignment, find the delay time in the transfer function window for the band right above the subs, low mids for example. Lets say 60.25 ms. Take a screenshot of the current transfer function window, with the phase viewable. (make sure you don't have the group delay option checked.) Mute that bandpass. Now turn on the subs, and get the delay time for the subs as close to 60.25 ms as possible. DON'T insert the delay in the find delay window, just keep checking the delay to get the subs close to 60.25 ms. Once you get the delay close, switch back to the transfer function window and adjust the sub delay to get the sub/mids phase overlapped. You should be able to see the mids phase trace that you stored earlier.
I'd suggest using music to align subs, not pink noise. I've had better luck with music program.
Sorry if this post doesn't make all the sense in the world, I'm on my phone in a bus.
Cheers
