Reply to thread

Message

Re: Pro 2 AD Conversion - why high pass at 30hz ?

Thanks for the clarification while that sounds similar to the same language that raised the confusion.

I will gather from your repeat that there is nothing special going on with the conversion, just a 30 Hz HPF immediately before the A/D stage, which will scrub off any infrasonic energy.

It is not unusual to HPF even higher than that for live sound, and 4 Hz is little too low (IMO) for the full bandwidth position... but opinions vary.

JR

[QUOTE="John Roberts, post: 50863, member: 126"] Re: Pro 2 AD Conversion - why high pass at 30hz ? Thanks for the clarification while that sounds similar to the same language that raised the confusion. I will gather from your repeat that there is nothing special going on with the conversion, just a 30 Hz HPF immediately before the A/D stage, which will scrub off any infrasonic energy. It is not unusual to HPF even higher than that for live sound, and 4 Hz is little too low (IMO) for the full bandwidth position... but opinions vary. JR [/QUOTE]

Verification